Flat, compacted pads ready to frame.
Whether you are taking delivery of a 12x20 backyard shed, pouring a 30x40 shop slab, or building a detached ADU, the structure is only as square and crack-free as the pad underneath it. Clear Grade builds dead-level, mechanically compacted gravel and slab-prep pads across Snohomish and King counties.
Shed installers and pole-building crews walk away if a pad is out of level by two inches or soft at the edges. Concrete slabs crack when poured over unstripped grass or uncompacted loose stone. We build firm, laser-checked pads ready on inspection day.

Compacted pads that never settle
Dropping gravel directly on grass or soft black dirt guarantees settling corners and sticking doors. We strip all sod and organic soil down to undisturbed native subgrade, lay woven/non-woven geotextile where needed, and compact crushed 5/8"-minus rock in measured lifts.
- Prefab shed pads, hot-tub pads, greenhouse bases, and gazebo footprints
- Detached garage, pole building, metal shop, and barn pad excavation
- Concrete patio, monolithic slab, and sport-court sub-base preparation
- Rotary laser elevation checks + vibratory roller or plate compaction in lifts
Right Rock & Material Guide
See how crushed basalt fines, structural base rock, recycled asphalt millings, clean drain stone, and bulk soils perform in wet Western Washington conditions.
Request Written Options for Site & Building Pad Prep.
Upload or text 2 to 4 photos of your work area and access width for a free written estimate, or schedule an on-site operator walkthrough.
Flat yards or sloped bench cuts
On sloped lots, we cut into the uphill bank and build a keyed, compacted structural bench or retaining edge with perimeter drainage on the uphill side so hillside runoff never undermines your new building.
Agreed site finish
Organics stripped to firm native bearing soil, laser-leveled within tight tolerances, and 5/8"-minus crushed rock compacted tight in lifts.
On schedule for your concrete crew
Share your shed manufacturer spec sheet or concrete contractor dimensions and thickness requirements - we build the exact over-dig width and elevation they want.
- Provide exact structure dimensions plus required perimeter overhang (typically +1 ft per side for sheds, +2 ft for shops).
- Share manufacturer base specs (crushed rock thickness, timber border, or concrete form depth).
- Confirm delivery truck access for rock import and excess soil haul-off.
A closer look at the work
Representative Pacific Northwest equipment, aggregate, and finish examples showing typical site conditions and Clear Grade work standards.
Frequently asked questions
How thick should a compacted gravel shed or garage pad be?
Most prefab sheds and hot tubs require 4 to 6 inches of compacted 5/8"-minus crushed rock over stripped native soil (with geotextile fabric over clay), while heavy vehicle garages and shops typically specify 6 to 12 inches in compacted lifts.
Why use 5/8"-minus crushed rock instead of round pea gravel or clean drain rock?
Pea gravel rolls underfoot like marbles and never locks up. Crushed 5/8"-minus contains fractured angular stone plus rock fines ("minus") that bind together almost like concrete once dampened and compacted.
Can you build a level shed or shop pad on a sloped yard?
Yes. We cut into the uphill bank, key and compact the base, cut an uphill drainage swale so water routes around the pad, and set timber, block, or boulder retention where grade change requires it.


