Saw-cut, break & haul old slabs.
Breaking a 4-inch or 6-inch rebar-reinforced slab with a rental jackhammer and hauling 15 tons of concrete by hand is brutal, injury-prone work. Clear Grade brings hydraulic breakers, excavators with thumbs, diamond cut-off saws, and heavy dump hauling to clear concrete and asphalt fast across Snohomish and King counties.
Old Northwest driveways and patios crack and heave from tree roots and soft clay subgrades. Tearing out the damaged concrete and fixing the base underneath lets your concrete or paver contractor pour a slab that stays flat.

Saw-cuts, breaking & recycling
We score crisp diamond-blade relief cuts against garage thresholds, sidewalks, or house walls that remain, break and pry slabs cleanly without jarring adjacent structures, and haul clean concrete to aggregate recycling yards (keeping disposal rates far lower than landfill trash).
- Cracked or root-heaved concrete driveways, parking pads, and RV slabs
- Backyard concrete patios, walkways, steps, hot-tub pads, and shed slabs
- Old asphalt driveway stripping and deteriorated hardscape removal
- Sub-base re-leveling, fresh 5/8"-minus crushed rock, and roller/plate compaction for your concrete finisher
Request Written Options for Concrete & Asphalt Removal.
Upload or text 2 to 4 photos of your work area and access width for a free written estimate, or schedule an on-site operator walkthrough.
Fix roots & soft subgrade
While the slab is open, we remove the tree roots or wet clay pocket underneath and compact a solid crushed-rock base so your new concrete or paver install stays flat for decades.
Agreed site finish
Crisp saw-cut edges, all broken concrete and rebar loaded out for aggregate recycling, and subgrade scraped clean (or rocked and compacted if requested).
Quick measurements for an accurate quote
Send length x width, approximate slab thickness (usually 4" to 6"), whether wire mesh or rebar is known, and a photo showing truck/equipment access.
- Measure slab length and width, and check an exposed edge for approximate thickness (usually 4" to 6").
- Mark exact cut lines where adjoining garage floors, walkways, or steps must stay untouched.
- Show street/driveway loading space for heavy concrete haul trucks or dump trailers.
A closer look at the work
Representative Pacific Northwest equipment, aggregate, and finish examples showing typical site conditions and Clear Grade work standards.
Frequently asked questions
Will breaking my driveway damage the garage slab right next to it?
No. Before any hydraulic breaker touches the slab, we make a full-depth diamond saw cut along the expansion joint or separation line so vibration and fractures stop cleanly at the cut.
Can you remove old asphalt driveways and brick/paver patios too?
Yes. Old asphalt, cobblestones, mortared brick walkways, and sunken paver bases are stripped, loaded out, and recycled cleanly.
Can you prep and compact the crushed-rock base for my concrete finisher?
Yes - most homeowners and concrete finishers have us excavate an extra 4 to 6 inches of soft dirt/roots while we are already there and compact fresh 5/8"-minus crushed rock to exact form grade.


