Clean bench cuts & wall drainage.
From Mukilteo and Edmonds bluffs to steep Kirkland, Bellevue, Issaquah, and Lake Stevens hillsides, usable flat yard often starts with cutting back a slope. Clear Grade handles hillside excavation, benching, and retaining-wall earthwork for homeowners, hardscape crews, and builders.
Excavating into a hillside requires stable temporary cut angles, dead-level base trenches, and room behind the wall face for drainage stone and geogrid reinforcement. Cutting corners behind the wall is why poorly prepped walls bulge after two wet winters.

Clean toe cuts & wall drainage
Most retaining walls fail from poor base compaction or hydrostatic water pressure behind the blocks/boulders - not the blocks themselves. We cut accurate over-dig room behind the wall line for perforated drain pipe, filter fabric, and clean drain rock.
- Slope cutbacks and hillside terracing to expand flat backyard or parking space
- Leveling-pad trenches and compacted crushed-rock bases for segmental block, timber, or poured walls
- Boulder rockery excavation and heavy rock handling with hydraulic thumb
- Washed drain-rock placement, heel-drain trenching, and compacted structural backfill
Right Rock & Material Guide
See how crushed basalt fines, structural base rock, recycled asphalt millings, clean drain stone, and bulk soils perform in wet Western Washington conditions.
Request Written Options for Retaining Wall & Slope Excavation.
Upload or text 2 to 4 photos of your work area and access width for a free written estimate, or schedule an on-site operator walkthrough.
Prep-only or boulder placement
Already hired a block/concrete wall contractor who needs the heavy dirt cut and hauled? We excavate to their string lines and haul the clay out. Looking for natural quarry-boulder placement on a residential bank? Tell us in your quote request.
Agreed site finish
Clean hillside cutback, compacted crushed-rock leveling trench, perforated heel-drain setup, and hauled spoils.
Engineering and 4-foot wall height rules
In most Washington cities and counties, walls over 4 feet high (or walls supporting a driveway/building surcharge) require engineered plans and a permit. Share your plans if applicable so we dig to exact geogrid embedment depths.
- Share wall length, planned height, and wall system (boulder rockery, Allan Block/segmental block, poured concrete, or timber).
- Provide engineered drawings if the wall exceeds 4 feet high or supports a driveway/structure surcharge.
- Confirm dump truck/trailer loading access for hauling out cut-bank clay.
A closer look at the work
Representative Pacific Northwest equipment, aggregate, and finish examples showing typical site conditions and Clear Grade work standards.
Frequently asked questions
When does a retaining wall require an engineer and permit in WA?
In most Snohomish and King County jurisdictions, walls under 4 feet tall (measured from bottom of footing to top of wall) without uphill slope or driveway surcharge are permit-exempt, while taller or loaded walls require engineering.
Can you do just the hillside excavation and dirt haul-off for my landscaper or mason?
Yes. Hardscape crews and DIY homeowners frequently hire Clear Grade strictly to cut the bank, dig the base trench, and haul away 20 to 100+ yards of heavy clay so they can focus on stacking block.
Do you also place quarry boulders for natural Northwest rockeries?
Yes. With an excavator and hydraulic thumb, we key and stack angular granite/basalt quarry boulders over crushed rock and filter fabric for durable hillside banks.


