Straight, clear boundary corridors.
Fence installers charge steep extras - or walk off the job - when survey lines are buried under blackberry vines, laurel hedges, saplings, and old roots. Clear Grade opens clean, unobstructed working corridors along property lines across Snohomish and King counties.
A crooked fence almost always starts with a crew trying to dodge bushes, old stumps, and blackberry clumps along the property line. Clearing a clean 6- to 10-foot working lane first lets fence builders pull a tight string line and set every post plumb.

Built for straight fence lines
Simply weed-whacking brush leaves woody stumps and roots right where every 8-foot post hole lands. We clear brush back to a workable width and pull or grind roots along the post line so augers dig clean.
- 6-foot to 12-foot clear working corridors along staked property boundaries
- Removal of overgrown hedges, blackberry walls, and volunteer saplings
- Old fence tear-out and concrete post-footing extraction when replacing fences
- 811 underground utility locate before any post-line root digging
Right Rock & Material Guide
See how crushed basalt fines, structural base rock, recycled asphalt millings, clean drain stone, and bulk soils perform in wet Western Washington conditions.
Request Written Options for Fence Line Clearing.
Upload or text 2 to 4 photos of your work area and access width for a free written estimate, or schedule an on-site operator walkthrough.
Survey stakes & boundary care
Boundary work requires care. Please have corners or string lines clearly marked before clearing starts; we keep tracks, blades, and debris strictly on your authorized side of the line.
Agreed site finish
A clean, walkable corridor cleared of brush, vines, and post-line roots, with 811 utility marks respected throughout.
Bundle fence tear-out & clearing
If a rotting cedar or tangled chain-link fence is buried inside the brush, we pull the old panels, posts, and concrete collars at the same time so your fence builder walks onto a ready line.
- Locate and flag your property survey pins or pull a visible string line between known corners.
- Confirm with your neighbor if overgrown hedges or an old shared fence sit directly on the boundary.
- Tell us whether old fence panels and concrete post plugs also need to be pulled out.
A closer look at the work
Representative Pacific Northwest equipment, aggregate, and finish examples showing typical site conditions and Clear Grade work standards.
Frequently asked questions
How wide of a path do fence installers usually need?
Three to four feet on your side of the line is minimum for hand work, while 6 to 10 feet lets compact machinery clear brush and pull old post footings rapidly.
What if tree roots sit right where new fence posts go?
We grind or excavate dead stumps and sever interfering surface roots along the line (while respecting large structural roots of healthy boundary trees you plan to keep).
Do you install the new fence too, or just clear and demo?
We specialize in the heavy prep - clearing brush, pulling the old fence and concrete footings, and grading the line - so your fence contractor or DIY crew can start setting posts immediately.


