Heavy-duty culverts & clean ditches.
A silted-up ditch or a rusted, crushed metal culvert backs winter storm runoff right over your driveway - washing out gravel and undermining asphalt. Clear Grade cleans overgrown ditches, cuts surface swales, and installs heavy-duty driveway culverts across Snohomish and King counties.
When driveway culverts rust through, flatten under delivery-truck weight, or plug with silt and blackberry roots, storm runoff jumps the ditch and cuts right across your driveway.

Rated for heavy truck loads
Culverts crush when installed too shallow or backfilled with soft mud instead of compacted crushed rock. We excavate to proper invert elevations, bed dual-wall HDPE (N-12) or specified pipe on firm aggregate, compact backfill in lifts around the haunches, and armor both ends.
- New driveway culvert installation and crushed/rusted culvert replacement
- Overgrown ditch mulching and clean V- or trapezoidal-profile ditch regrading
- Grass-mowable or river-rock/quarry-spall drainage swale excavation across acreage
- Quarry-spall / riprap inlet and outlet armoring to prevent bank scour
Right Rock & Material Guide
See how crushed basalt fines, structural base rock, recycled asphalt millings, clean drain stone, and bulk soils perform in wet Western Washington conditions.
Request Written Options for Culverts, Ditches & Swales.
Upload or text 2 to 4 photos of your work area and access width for a free written estimate, or schedule an on-site operator walkthrough.
Private lanes & right-of-way
Interior property crossings and private roads can be scheduled immediately. Work inside a county or city road right-of-way ditch may require a right-of-way/driveway access permit specifying minimum culvert diameter (typically 12" or 18") - share permit specs if applicable.
Agreed site finish
Clean, free-flowing ditch profile, heavy-duty dual-wall culvert bedded and compacted to load spec, and rock-armored ends.
Bundle with driveway grading
Replacing a failing culvert right before resurfacing and compacting your gravel driveway solves the washout problem once and for all.
- Measure existing culvert length and diameter (typically 12", 15", or 18" wide by 20 to 40 ft long).
- Photograph both inlet and outlet ends plus ditch vegetation upstream and downstream.
- Confirm whether the ditch is on private land/easement or inside a city/county road right-of-way.
A closer look at the work
Representative Pacific Northwest equipment, aggregate, and finish examples showing typical site conditions and Clear Grade work standards.
Frequently asked questions
How much gravel cover is needed over a driveway culvert so trucks will not crush it?
Dual-wall corrugated HDPE (ADS N-12) typically requires at least 12 inches of well-compacted crushed rock cover over the top of the pipe for standard traffic and delivery trucks (or heavy-wall steel/ductile/C900 pipe where shallow ditches force tighter cover).
Can you clean out ditches completely buried under 8-foot blackberry?
Yes. First we shred the blackberry canes down with our boom mulcher so we can see the ditch banks clearly, then reshape the channel smoothly with a ditching/grading bucket without digging deeper than downstream flow allows.
What is a grass drainage swale vs an open ditch?
A swale has wide, gentle side slopes (3:1 or flatter) that you can mow right across like regular lawn during summer while safely channeling heavy winter stormwater across your yard.


